Light armor panel side prints through glass
Submitted
Hello, while printing I have seen this block (triangular plate) get built intersecting glass perpendicularly. The distance from the glass to the edge of the previous layer was about 1.25 m, and this 2.5 m x 2.5 m block should need at least 2.6 m of distance. Please take a look.
I have the same bug ![[2025-09-15] 12...](https://support.keenswh.com/spaceengineers/pc/attachments/31653?token=0538e90472f6f942573c9c752faa71fe.jpg){kind=link}
It happens with square panels too, sometimes.
It happens with square panels too, sometimes.
Replies have been locked on this page!