latest collector hotfix broke my collectors
Investigating
I have a very simple setup, where 6 collecters are stationary placed over 6 farm plots. It worked flawlessly before the patch. But yesterday only 1 out of the 6 collectors did grab the plant once it was rdy. Today not a single 1 worked.
Iam playing on official Keen Server EU #3
...well i realized, u changed the top connection from small to large conveyer
I have the same bug Access denied
update 2, collecting still not working despite that 1 collector which kept working even after the patch - very silly
update 2, collecting still not working despite that 1 collector which kept working even after the patch - very silly
I discovered this problem today as well. While I don't know if it applies to the large grid blocks, the small grid Half Block Collectors do not work, or at the least do not collect anything directly in front of them at any ranges. I also operate a harvester system for 24 Farm Plots in each greenhouse, which passes the Collectors directly over the Farm Plots, and the Half Block Collectors fail to harvest anything.
Upon further testing, I discovered that the small grid full sized Collector Block does still work, and will still collect crops from the Farm Plots. I've included a screenshot of the two side-by-side, with one harvesting while the other does nothing.
I discovered this problem today as well. While I don't know if it applies to the large grid blocks, the small grid Half Block Collectors do not work, or at the least do not collect anything directly in front of them at any ranges. I also operate a harvester system for 24 Farm Plots in each greenhouse, which passes the Collectors directly over the Farm Plots, and the Half Block Collectors fail to harvest anything.
Upon further testing, I discovered that the small grid full sized Collector Block does still work, and will still collect crops from the Farm Plots. I've included a screenshot of the two side-by-side, with one harvesting while the other does nothing.
I've encountered this as well, I haven't tried to USE them since before the latest hotfix. Prior to the hotfix, they collected crops, but the items they collected got stuck in the collectors. Did some testing, the problem was that they'll pass items to other half-block collectors through their small conveyor ports, but won't pass items to OTHER blocks with those same small ports. I did some more testing with them today, after the hotfix, and this behavior is still the same. I didn't try to have them actually collect anything though, so can't speak to that.
I've encountered this as well, I haven't tried to USE them since before the latest hotfix. Prior to the hotfix, they collected crops, but the items they collected got stuck in the collectors. Did some testing, the problem was that they'll pass items to other half-block collectors through their small conveyor ports, but won't pass items to OTHER blocks with those same small ports. I did some more testing with them today, after the hotfix, and this behavior is still the same. I didn't try to have them actually collect anything though, so can't speak to that.
Hello Engineers,
Thank you for reaching out on our forum regarding this issue.
We are already aware of an issue with the Flat Collector block. You can find the existing report here:
https://support.keenswh.com/spaceengineers/pc/topic/56179-new-flat-collector-side-conveyors-not-working
Could you please compare the behavior you are experiencing with the issue described and shown in that report? If it appears to be the same issue on your side, please let us know.
If not, please provide us with some additional information, including the save file or blueprint of the affected grid, as well as steps to reproduce the issue or a video demonstrating the behavior. This will help us reproduce and investigate the problem properly on our side.
Thank you in advance.
Kind Regards,
Keen Software House: QA Department
Hello Engineers,
Thank you for reaching out on our forum regarding this issue.
We are already aware of an issue with the Flat Collector block. You can find the existing report here:
https://support.keenswh.com/spaceengineers/pc/topic/56179-new-flat-collector-side-conveyors-not-working
Could you please compare the behavior you are experiencing with the issue described and shown in that report? If it appears to be the same issue on your side, please let us know.
If not, please provide us with some additional information, including the save file or blueprint of the affected grid, as well as steps to reproduce the issue or a video demonstrating the behavior. This will help us reproduce and investigate the problem properly on our side.
Thank you in advance.
Kind Regards,
Keen Software House: QA Department
Replies have been locked on this page!