Blueprint on Projector BUG - Contact Update - Game Breaking
Duplicate
Hi KSWH Team,
I've started getting this odd bug with projectors and blueprints. Doesnt seem to happen every time, however, it hard locks the UI and you have to force quit the game.
I noticed it happens after I fully print a ship on a merge block and then turn off the merge block that was connecting the ship being printed.
I have "Keep projection" enabled on the projector that also holds the merge block that is turned off.
Files:
Space Engineers...
I have the same bug 
OK I think I have figured out steps to reproduce - this is my setup: -
1. Use a small rotor head to make a small grid with a small projector connected a large grid
2. Make a merge block on the new small grid attached via rotor head with a merge block
4. Input to the small grid projector a projection with a merge block and click "keep projection"
5. Align the merge grid on the small projection with the small grid merge block that contains your projector.
6. Weld the small projection until the merge blocks are connected from the small grid to what was the projection and the projection is completed.
7. Turn off the merge block on the small grid that holds your merge block and projector via the control station on the large grid.
8. Repeat error and UI lock occurs with message "Cannot find the Blueprint file".
OK I think I have figured out steps to reproduce - this is my setup: -
1. Use a small rotor head to make a small grid with a small projector connected a large grid
2. Make a merge block on the new small grid attached via rotor head with a merge block
4. Input to the small grid projector a projection with a merge block and click "keep projection"
5. Align the merge grid on the small projection with the small grid merge block that contains your projector.
6. Weld the small projection until the merge blocks are connected from the small grid to what was the projection and the projection is completed.
7. Turn off the merge block on the small grid that holds your merge block and projector via the control station on the large grid.
8. Repeat error and UI lock occurs with message "Cannot find the Blueprint file".
Large Grid with Control Station and Toggle Merge Block button for connected Small Grid (via small Rotor Head) -->
Large Rotor -> Small Head on Large Rotor -> Small Grid with Projector and Merge Block <---> Projection with Merge Block aligned to Small Grid Merge Block
Large Grid with Control Station and Toggle Merge Block button for connected Small Grid (via small Rotor Head) -->
Large Rotor -> Small Head on Large Rotor -> Small Grid with Projector and Merge Block <---> Projection with Merge Block aligned to Small Grid Merge Block
Hello Engineer,
thank you for reaching our forum with this problem.
However, as you can see, we are already aware of this problem. Please see link:
https://support.keenswh.com/spaceengineers/pc/topic/44448-1-205-26-projector-softlock
As that shared thread is currently in "Reported" state, I will close this one as "Duplicate".
Please follow the shared thread for any new information, comments and possible fix coming.
Thank you for your understanding.
Kind Regards
Keen Software House: QA Department
Hello Engineer,
thank you for reaching our forum with this problem.
However, as you can see, we are already aware of this problem. Please see link:
https://support.keenswh.com/spaceengineers/pc/topic/44448-1-205-26-projector-softlock
As that shared thread is currently in "Reported" state, I will close this one as "Duplicate".
Please follow the shared thread for any new information, comments and possible fix coming.
Thank you for your understanding.
Kind Regards
Keen Software House: QA Department
Replies have been locked on this page!