Standard Control Panel Options Inconsistant when Selecting Multiple with Antenna.
Reported
The ship control panel is supposed to only show the options that are the same between blocks when multiple functional blocks are selected. In some cases most if not all are shown such as with rotors and hinges. Others have few.
When selecting multiple blocks that include the Antenna, the few options that should remain do not. The following disappear when selecting blocks that also include these options.
- Show Block in Terminal
- Show Block in Toolbar Config
These should show up when selecting an Antenna along with a button panel for example.
Files:
20220302201113_...
I have the same bug 
Hello, Engineer!
Thanks for letting us know.
The issue was successfully reproduced and put into our internal system.
Kind Regards
Keen Software House: QA Department
Hello, Engineer!
Thanks for letting us know.
The issue was successfully reproduced and put into our internal system.
Kind Regards
Keen Software House: QA Department
This is still an issue in v205:
No antenna selected:
With antenna selected:
The issue resides in MyRadioAntenna.CreateTerminalControls() redeclaring the common controls (intentionally removes them first), commenting those up to CustomName should solve this.
This is still an issue in v205:
No antenna selected:
With antenna selected:
The issue resides in MyRadioAntenna.CreateTerminalControls() redeclaring the common controls (intentionally removes them first), commenting those up to CustomName should solve this.
Replies have been locked on this page!