[187] Air vent uses full power after filling a room

Digi shared this bug 5 years ago
Reported

Apart from air vent's power usage being really high, especially for the smallship variant, it also has an issue that makes it use the operational power all the time.


For context, it has these values in the definition (power is in MW):

<OperationalPowerConsumption>0.33</OperationalPowerConsumption>
<StandbyPowerConsumption>0.001</StandbyPowerConsumption>


You can see in the screenshot attached how much power it actually uses after I've filled a room.


Because the game doesn't show the airvent's power usage, I've included a mod script in order to see the power usage easier.


STR:1. Create a local mod and add this script to it: https://pastebin.com/raw/Jsahc48G

2. Add the mod to a creative world and load it.

3. Preferably in space, place an oxygen tank and an air vent on one end of it.

4. Make a sealed room around that, with a door and leave the door open.

5. Place a battery or reactor.

6. Turn "Show In HUD" on for the airvent so the mod shows you its power stats.

7. Close the door to seal the room and watch the power usage.

Replies (4)

photo
1

I also have this. I've taken to turning off the vent after pressurizing the room because 33 kW is non-negligible.

photo
1

thats 330kW unfortunately :(

photo
photo
1

Well, sometimes the depressurization works even when the Air Vent is turned off ;-)


Currently I use it to keep my Oxygen Tank full of O2 on Alien planet ...

photo
2

Hi guys,

please retest it on current version (1.189.040) and let me know if it works or not.

Thanks!

photo
2

It's still an issue but with different values because they got changed.

It starts off with 0.001 MW (with room not sealed) and when it pressurizes it gets stuck at 0.1 MW even after it's done pressurizing (with my character not inside the room) and even after unsealing the room.

The STR in the topic still applies, you could add step 8: Open the door to unseal and see how power usage does not change.

photo
photo
1

Hello, Engineers!

This thread is rather old now, as well as last comments here. I can´t follow the reprosteps, as the mod/script is no longer available.

Can any of you please either confirm or disprove that this issue is still around? Was it fixed in the meantime? If no, can you please share again the mod, so I can test it on my own as well?

Thanks in advance for your reply.

Kind Regards

Keen Software House: QA Department

photo
1

Yes it's still an issue.

Mod's not really required, you can look at battery output instead.

Large airvent:

      <OperationalPowerConsumption>0.1</OperationalPowerConsumption>
      <StandbyPowerConsumption>0.001</StandbyPowerConsumption>
That's in MW, so 100kW operational and 1kW standby (which is kind of a lot for standby but anyway).

STR:

1. Make an airtight room with o2/h2 generator and airvent inside, place some ice in the generator too.

2. Replace one of the exterior wall blocks with a battery (and you be outside too, so have the terminal outside aswell).

3. Once airvent fully pressurized the room turn off the o2/h2 generator.

4. Look at battery output, it always stays at 100 kW from the airvent.

photo
1

Hello, Digi!

Thanks a lot for coming back to this thread.

Firstly is seemed that I could not reproduce this issue in my world, but after more testing, it turned out, that it is indeed happening when you are OUTSIDE the base! That is quite interesting!

Thanks again for providing the steps to reproduce.

This issue was put into our internal system upon successful reproduction.

Kind Regards

Keen Software House: QA Department

photo
Leave a Comment
 
Attach a file