Vehicle/Ship dosnt react anymore
hi Guys i´ve found something weard, dont know if its on purpose but...
sample: you have a base on Moon (no wind turbines only solar panels or Hydrogen Engines)
it´s night and you run on Batterys. on your Base is a Ship docket and the Batterys of the ship are set to "Recharge" as soon as the power on your base goes off (empty batteries or no fuel for the hydrogen engine) the Connector of your Base goes RED and the ship drops..
now when you enter your ships cockpit and set the ship´s batterys to auto and activate the thrusters the ship wont be able to fly/use.
there was enough power in the Batterys (of the ship) and enough fuel in the hydrogen tanks (for the thrusters)
i tryed to accelarate and hear the noise of the Thrusters going up but in 3rd Person view i could see that nothing happens, the thrusters just didnt react. The ship was kind of Dead
dont know if this is a bug or realy on purpose but i woudnlt see any reason for that
greetings Pat ID
I have the same bug
Hello, Engineer!
Connectors should not disconnect after grid loses power, we weren't able to reproduce this issue. Is it constantly happening to you?
Kind Regards
Keen Software House: QA Department
Hello, Engineer!
Connectors should not disconnect after grid loses power, we weren't able to reproduce this issue. Is it constantly happening to you?
Kind Regards
Keen Software House: QA Department
happend just once
so i wasnt sure if this is a bug or just a strange happening
as i sayd both grids (ship and base) lost power and sudenly the connectors went red
happend just once
so i wasnt sure if this is a bug or just a strange happening
as i sayd both grids (ship and base) lost power and sudenly the connectors went red
A couple things you could try-
Manual disconnect the base connector through the menu.
Or use power from your ship to temporarily give power to the base. Then disconnect (Kinda risky if you cant reconnect the ship)
What the problem is for me when I get stuck to a base connector, is I set some batteries to recharge or there is a group of thrusters that aren't on, like 1 out of 4.
A couple things you could try-
Manual disconnect the base connector through the menu.
Or use power from your ship to temporarily give power to the base. Then disconnect (Kinda risky if you cant reconnect the ship)
What the problem is for me when I get stuck to a base connector, is I set some batteries to recharge or there is a group of thrusters that aren't on, like 1 out of 4.
Replies have been locked on this page!