Timer block wont start Ion thrusters
Outdated
Simple reproducting: Raector, 2x timer and thruster.
1 timer block set to turn off ion thruster and start another timer block.
2 Second timer set to turn on ion thruster. Set time ~3s
Start 1 timer block.
Fix is power turn off and on again.
(version 1.188.024)
I have the same bug 
Hi, the problem is not related to the timing block.
The same will happen when the ion thrust is switched on and off manually.
There is no flame even when the ion thrust is turned on again.
If you have more thrusts on a ship and merge them ALL into a group, the result after switching off and on the group is the same.
I think the problem is somewhere in setting MyResourceSinkComponent for motors.
Hi, the problem is not related to the timing block.
The same will happen when the ion thrust is switched on and off manually.
There is no flame even when the ion thrust is turned on again.
If you have more thrusts on a ship and merge them ALL into a group, the result after switching off and on the group is the same.
I think the problem is somewhere in setting MyResourceSinkComponent for motors.
Hello, Engineer!
Thank you for your feedback! Your topic has been added between considered issues.
Please keep voting for the issue as it will help us to identify the most serious bugs.
We really appreciate your patience.
Kind Regards
Keen Software House: QA Department
Hello, Engineer!
Thank you for your feedback! Your topic has been added between considered issues.
Please keep voting for the issue as it will help us to identify the most serious bugs.
We really appreciate your patience.
Kind Regards
Keen Software House: QA Department
Hey there.
I can confirm there's a bug with Timer Blocks (or objects that can have actions).
I tried numerous combinations to set an airlock. Here are the results :
- Set first timer block to close a sliding door and call a second timer block which turn OFF another sliding door (the door never went down)
- Tried to depressurized the airlock via an air vent. The room was sort of depressurized, but the air vent's lights were still green instead of blue, plus when looking into the panel, the air vent was still set on "depressurize off"
- While trying to figure out why this is happening, I noticed that the sliding door (yes, the first one that is only set to close) was stuck in that position. The only way to open it was to set off and on the door, then changing its state two times.
- The actions available on air vents are not saved (set one or two actions, leave the menu then open it again, no more actions set)
So yes, there's an issue with timer blocks and/or objects than can execute actions.
(ver. 1.188.025) - Vanilla Multiplayer
Hey there.
I can confirm there's a bug with Timer Blocks (or objects that can have actions).
I tried numerous combinations to set an airlock. Here are the results :
- Set first timer block to close a sliding door and call a second timer block which turn OFF another sliding door (the door never went down)
- Tried to depressurized the airlock via an air vent. The room was sort of depressurized, but the air vent's lights were still green instead of blue, plus when looking into the panel, the air vent was still set on "depressurize off"
- While trying to figure out why this is happening, I noticed that the sliding door (yes, the first one that is only set to close) was stuck in that position. The only way to open it was to set off and on the door, then changing its state two times.
- The actions available on air vents are not saved (set one or two actions, leave the menu then open it again, no more actions set)
So yes, there's an issue with timer blocks and/or objects than can execute actions.
(ver. 1.188.025) - Vanilla Multiplayer
Replies have been locked on this page!