The Big Stones change ore after finding on DS ....
Outdated
Have this happen now multiple times ....
Search Stone (the big on earth like planet as example ..) - mark the ore that is displayed from the hand drill .... and it looks right from the colors on the surface of the stone ...
After a couple of time .. get back to the stone ... drill on it ... suddenly the ore change from Ni to Fe as example .... the surface color change too ... and sometimes the hand drill show the new ore .. sometimes it shows still the old ... but only the new is coming ... not nice to dont get an serious result from the ore scanner ....
I have the same bug
Hello, Engineer!
Thank you for your feedback! Your topic has been added between considered issues.
Please keep voting for the issue as it will help us to identify the most serious bugs.
We really appreciate your patience.
Kind Regards
Keen Software House: QA Department
Hello, Engineer!
Thank you for your feedback! Your topic has been added between considered issues.
Please keep voting for the issue as it will help us to identify the most serious bugs.
We really appreciate your patience.
Kind Regards
Keen Software House: QA Department
have this bug in multiple variations now seen .... examples :
The start is always - found stone - dedect with hand drill or with small grid ore scanner the "expected" Ore ... Typ A
Then ....
You drill direct after finding in the big stone .... 3 things can happen ...
The ore is still Typ "A" - work as expected ...
No ore/stone is visual drilled out - but if you get close to the drilled aera - you glitch in the stone ...
--After an reconnect 2 things can happen ...
--It is still ore Typ "A" .. or it have changed to Ore Typ "B" with the now correct texture from the big stone for Typ "B" ..
You drill and it comes ore Typ "B" out .. but the hand drill ore scanner show still ore Typ "A" , and over the big stone both textures are layered .... after an reconnect all is good, and you have ore Typ "B" ...
If you first leave the place without drilling and come back later, the big stone get "maybe" the right texture and ore dedecting status .. ore not ... you realy know it ONLY if you drill on it .... this is not optimal, as you MUSST now drill all big stones to clearly know the ore he have .....
have this bug in multiple variations now seen .... examples :
The start is always - found stone - dedect with hand drill or with small grid ore scanner the "expected" Ore ... Typ A
Then ....
You drill direct after finding in the big stone .... 3 things can happen ...
The ore is still Typ "A" - work as expected ...
No ore/stone is visual drilled out - but if you get close to the drilled aera - you glitch in the stone ...
--After an reconnect 2 things can happen ...
--It is still ore Typ "A" .. or it have changed to Ore Typ "B" with the now correct texture from the big stone for Typ "B" ..
You drill and it comes ore Typ "B" out .. but the hand drill ore scanner show still ore Typ "A" , and over the big stone both textures are layered .... after an reconnect all is good, and you have ore Typ "B" ...
If you first leave the place without drilling and come back later, the big stone get "maybe" the right texture and ore dedecting status .. ore not ... you realy know it ONLY if you drill on it .... this is not optimal, as you MUSST now drill all big stones to clearly know the ore he have .....
Replies have been locked on this page!