Grid Problem [1.192.022]
Outdated
I have been getting stuck in blocks and I noticed this when I put a projector on a wrecked ship I am fixing. It looks to me that the Grids are offset from where they should be. In the attached picture the projector is on grid and the projection is off it. When a part is welded it snaps to the proper grid.
Files:
GridProblem.jpg
I have the same bug 
Hello, Engineer!
Thank you for your feedback! Your topic has been added between considered issues.
Please keep voting for the issue as it will help us to identify the most serious bugs.
We really appreciate your patience.
Kind Regards
Keen Software House: QA Department
Hello, Engineer!
Thank you for your feedback! Your topic has been added between considered issues.
Please keep voting for the issue as it will help us to identify the most serious bugs.
We really appreciate your patience.
Kind Regards
Keen Software House: QA Department
This grid bug made the PAM mining script go nuts, where the location of connector and location of actual connector were different. I found the problem got weird when I went back to the place I started. I had this odd stationary movement. The ship or player would move relative of each other but the ship was set to be a stationary station and the speed of player is 0? I went to Admin mode and Cut my ship and pasted it, It seems to be back to normal. I am wondering if the bug is related to the distance from center of the map.
This grid bug made the PAM mining script go nuts, where the location of connector and location of actual connector were different. I found the problem got weird when I went back to the place I started. I had this odd stationary movement. The ship or player would move relative of each other but the ship was set to be a stationary station and the speed of player is 0? I went to Admin mode and Cut my ship and pasted it, It seems to be back to normal. I am wondering if the bug is related to the distance from center of the map.
Replies have been locked on this page!