Thank you for reaching out to us on the forum and for sharing the screenshots.
Based on the errors you're encountering, there are a few potential causes:
Corrupted save file: If the game's saving process was interrupted, the world might become unreadable or unable to save further changes.
Running out of memory: Large worlds or complex blueprints, such as your frigate, can exceed the available RAM/VRAM, preventing the game from loading or saving properly.
Disk or file write issues: Insufficient free space on the drive, permission problems, or a failing drive sector can block the game from writing the save data.
Mods/scripts: Outdated or broken mods can lead to save and load failures.
Here are some workarounds you can try:
Check disk space and permissions:
Ensure you have enough free space on the drive where your saves are stored (typically `\AppData\Roaming\SpaceEngineers\Saves`) and that Steam has write permissions for this location.
Verify the game installation:
In your Steam Library, right-click Space Engineers, then go to Properties > Installed Files > click Verify integrity of game files.
Load a backup save:
Within the game, navigate to Load Game, click on your world, and from the left panel, select the Backups button, then load a previous save where the world was functioning correctly.
Test without MODs:
If your world uses MODs, try temporarily disabling them to see if your save loads.
Free up system memory:
Close background applications before running the game. You can also try lowering game settings by going to Options > Graphics> Quality Preset and choosing Low or Medium.
If the issue persists, please send us the affected world save and the log file from the time this issue occurred.
You can access your log files by typing %appdata% into your Windows search bar and you will be redirected to the hidden Roaming folder. After that just follow: \Roaming\SpaceEngineers.
You can access your save files by typing %appdata% into your Windows search bar and you will be redirected to the hidden Roaming folder. After that just follow: \Roaming\SpaceEngineers\Saves. There should be a folder with your SteamID and your saves.
Please zip the file and attach it here. If you are having difficulty attaching files you can optionally use Google Drive. When sharing a google drive link please make sure it is set to be downloadable by anyone with the link.
Kind regards,
Keen Software House: QA Department
Hello Riley,
Thank you for reaching out to us on the forum and for sharing the screenshots.
Based on the errors you're encountering, there are a few potential causes:
Corrupted save file: If the game's saving process was interrupted, the world might become unreadable or unable to save further changes.
Running out of memory: Large worlds or complex blueprints, such as your frigate, can exceed the available RAM/VRAM, preventing the game from loading or saving properly.
Disk or file write issues: Insufficient free space on the drive, permission problems, or a failing drive sector can block the game from writing the save data.
Mods/scripts: Outdated or broken mods can lead to save and load failures.
Here are some workarounds you can try:
Check disk space and permissions:
Ensure you have enough free space on the drive where your saves are stored (typically `\AppData\Roaming\SpaceEngineers\Saves`) and that Steam has write permissions for this location.
Verify the game installation:
In your Steam Library, right-click Space Engineers, then go to Properties > Installed Files > click Verify integrity of game files.
Load a backup save:
Within the game, navigate to Load Game, click on your world, and from the left panel, select the Backups button, then load a previous save where the world was functioning correctly.
Test without MODs:
If your world uses MODs, try temporarily disabling them to see if your save loads.
Free up system memory:
Close background applications before running the game. You can also try lowering game settings by going to Options > Graphics> Quality Preset and choosing Low or Medium.
If the issue persists, please send us the affected world save and the log file from the time this issue occurred.
You can access your log files by typing %appdata% into your Windows search bar and you will be redirected to the hidden Roaming folder. After that just follow: \Roaming\SpaceEngineers.
You can access your save files by typing %appdata% into your Windows search bar and you will be redirected to the hidden Roaming folder. After that just follow: \Roaming\SpaceEngineers\Saves. There should be a folder with your SteamID and your saves.
Please zip the file and attach it here. If you are having difficulty attaching files you can optionally use Google Drive. When sharing a google drive link please make sure it is set to be downloadable by anyone with the link.
Hello Riley,
Thank you for reaching out to us on the forum and for sharing the screenshots.
Based on the errors you're encountering, there are a few potential causes:
Corrupted save file: If the game's saving process was interrupted, the world might become unreadable or unable to save further changes.
Running out of memory: Large worlds or complex blueprints, such as your frigate, can exceed the available RAM/VRAM, preventing the game from loading or saving properly.
Disk or file write issues: Insufficient free space on the drive, permission problems, or a failing drive sector can block the game from writing the save data.
Mods/scripts: Outdated or broken mods can lead to save and load failures.
Here are some workarounds you can try:
Check disk space and permissions:
Ensure you have enough free space on the drive where your saves are stored (typically `\AppData\Roaming\SpaceEngineers\Saves`) and that Steam has write permissions for this location.
Verify the game installation:
In your Steam Library, right-click Space Engineers, then go to Properties > Installed Files > click Verify integrity of game files.
Load a backup save:
Within the game, navigate to Load Game, click on your world, and from the left panel, select the Backups button, then load a previous save where the world was functioning correctly.
Test without MODs:
If your world uses MODs, try temporarily disabling them to see if your save loads.
Free up system memory:
Close background applications before running the game. You can also try lowering game settings by going to Options > Graphics> Quality Preset and choosing Low or Medium.
If the issue persists, please send us the affected world save and the log file from the time this issue occurred.
Kind regards,
Keen Software House: QA Department
Hello Riley,
Thank you for reaching out to us on the forum and for sharing the screenshots.
Based on the errors you're encountering, there are a few potential causes:
Corrupted save file: If the game's saving process was interrupted, the world might become unreadable or unable to save further changes.
Running out of memory: Large worlds or complex blueprints, such as your frigate, can exceed the available RAM/VRAM, preventing the game from loading or saving properly.
Disk or file write issues: Insufficient free space on the drive, permission problems, or a failing drive sector can block the game from writing the save data.
Mods/scripts: Outdated or broken mods can lead to save and load failures.
Here are some workarounds you can try:
Check disk space and permissions:
Ensure you have enough free space on the drive where your saves are stored (typically `\AppData\Roaming\SpaceEngineers\Saves`) and that Steam has write permissions for this location.
Verify the game installation:
In your Steam Library, right-click Space Engineers, then go to Properties > Installed Files > click Verify integrity of game files.
Load a backup save:
Within the game, navigate to Load Game, click on your world, and from the left panel, select the Backups button, then load a previous save where the world was functioning correctly.
Test without MODs:
If your world uses MODs, try temporarily disabling them to see if your save loads.
Free up system memory:
Close background applications before running the game. You can also try lowering game settings by going to Options > Graphics> Quality Preset and choosing Low or Medium.
If the issue persists, please send us the affected world save and the log file from the time this issue occurred.
Kind regards,
Keen Software House: QA Department
Replies have been locked on this page!