Unable to Place Camera in on specific direction on the old connector
Not a Bug
No longer able to place a regular camera on the edge of the old connector in one specific orientation. All other orientations work save one.
Files:
image_2024-10-2...
I have the same bug 
Try the newer square connector. Its enclosed in a frame so you can attach things to it. It kinda looks like you have one there just behind the older one.
Try the newer square connector. Its enclosed in a frame so you can attach things to it. It kinda looks like you have one there just behind the older one.
Hello Engineer,
thank you for reaching our forum with this problem.
However, when I have tried on my side, it seems that there is no problem with the connector.
It is working, as it always has been (on previous version).
As you can notice, the connecter itself is not a full cube, but is longer in one direction. You can (and could on v204) place the camera blocks on two sides of the block. While on the other two it is not possible. Similar to you can place the camera on back (conveyor port), but not in front of it.
Please note when trying, on those two sides that it is possible to place the camera, the camera block itself is fully merged with the connector sides.
On the other two, however, there is still some space and you can see the body of the camera block.
Hope this helps.
If you still feel that this is wrong and should be changed, please open new thread on our Feedback forum:
https://support.keenswh.com/spaceengineers/pc/topic/add
Will close this thread, as there s nothing broken/bugged currently.
Thank you for your understanding.
Kind Regards
Keen Software House: QA Department
Hello Engineer,
thank you for reaching our forum with this problem.
However, when I have tried on my side, it seems that there is no problem with the connector.
It is working, as it always has been (on previous version).
As you can notice, the connecter itself is not a full cube, but is longer in one direction. You can (and could on v204) place the camera blocks on two sides of the block. While on the other two it is not possible. Similar to you can place the camera on back (conveyor port), but not in front of it.
Please note when trying, on those two sides that it is possible to place the camera, the camera block itself is fully merged with the connector sides.
On the other two, however, there is still some space and you can see the body of the camera block.
Hope this helps.
If you still feel that this is wrong and should be changed, please open new thread on our Feedback forum:
https://support.keenswh.com/spaceengineers/pc/topic/add
Will close this thread, as there s nothing broken/bugged currently.
Thank you for your understanding.
Kind Regards
Keen Software House: QA Department
Replies have been locked on this page!