Version tested: PC/Steam, after hotfix 1.205.025 (24th Oct)
Issue: Only 1 Wind Turbine will work on a grid, other Wind Turbines on the grid do not provide power, or animate, and show no wind clearance.
Tested: in a new Star System Start with no mods, default settings, started on Earth, built multiple Wind Turbines on a single grid (using Creative tools)
Version tested: PC/Steam, after hotfix 1.205.025 (24th Oct)
Issue: Only 1 Wind Turbine will work on a grid, other Wind Turbines on the grid do not provide power, or animate, and show no wind clearance.
Tested: in a new Star System Start with no mods, default settings, started on Earth, built multiple Wind Turbines on a single grid (using Creative tools)
Yes me too. 2nd wind turbine, "no wind clearance". After re-attaching, ( with a Merge Block ), to my static grid it works again, for a short while and then fails to spin. I did also notice that wind turbine 1st spins at double speed, " about 800ish ", until I leave my base and return , then settles back to around ," 400ish ". I am Glad that the error is repeatable by Keen. So YAY waiting on the fix.
Yes me too. 2nd wind turbine, "no wind clearance". After re-attaching, ( with a Merge Block ), to my static grid it works again, for a short while and then fails to spin. I did also notice that wind turbine 1st spins at double speed, " about 800ish ", until I leave my base and return , then settles back to around ," 400ish ". I am Glad that the error is repeatable by Keen. So YAY waiting on the fix.
I have the same bug
Can confirm. Suddenly they report wind clearance- none. Same turbines worked fine before today's hotfix.
Can confirm. Suddenly they report wind clearance- none. Same turbines worked fine before today's hotfix.
Some details:
Version tested: PC/Steam, after hotfix 1.205.025 (24th Oct)
Issue: Only 1 Wind Turbine will work on a grid, other Wind Turbines on the grid do not provide power, or animate, and show no wind clearance.
Tested: in a new Star System Start with no mods, default settings, started on Earth, built multiple Wind Turbines on a single grid (using Creative tools)
Example video: https://www.reddit.com/r/spaceengineers/comments/1gb7js5/turbine_limit/ (from a post by LCpl-Kilbey117 on Reddit)
Some details:
Version tested: PC/Steam, after hotfix 1.205.025 (24th Oct)
Issue: Only 1 Wind Turbine will work on a grid, other Wind Turbines on the grid do not provide power, or animate, and show no wind clearance.
Tested: in a new Star System Start with no mods, default settings, started on Earth, built multiple Wind Turbines on a single grid (using Creative tools)
Example video: https://www.reddit.com/r/spaceengineers/comments/1gb7js5/turbine_limit/ (from a post by LCpl-Kilbey117 on Reddit)
10/24/24 My wind turbines are not working after the update. There is only one of them is turning and making power.
The turbines are about 10 block above the plant. There 8 block away from each other. They said no wind.
10/24/24 My wind turbines are not working after the update. There is only one of them is turning and making power.
The turbines are about 10 block above the plant. There 8 block away from each other. They said no wind.
Hello Engineer,
Thank you for reaching out to our forum about this problem.
The issue was successfully reproduced on our side and put into our internal system.
Kind Regards
Keen Software House: QA Department
Hello Engineer,
Thank you for reaching out to our forum about this problem.
The issue was successfully reproduced on our side and put into our internal system.
Kind Regards
Keen Software House: QA Department
Same problem, came in right after the hotfix
Same problem, came in right after the hotfix
same problem here base is without power please fix fast
same problem here base is without power please fix fast
Same problem here. I think the problem exists since 1.205.024
Same problem here. I think the problem exists since 1.205.024
I have the same problem ( 1.205.025 ), i guess its time for an alternative power source :D
I have the same problem ( 1.205.025 ), i guess its time for an alternative power source :D
Yes me too. 2nd wind turbine, "no wind clearance". After re-attaching, ( with a Merge Block ), to my static grid it works again, for a short while and then fails to spin. I did also notice that wind turbine 1st spins at double speed, " about 800ish ", until I leave my base and return , then settles back to around ," 400ish ". I am Glad that the error is repeatable by Keen. So YAY waiting on the fix.
Yes me too. 2nd wind turbine, "no wind clearance". After re-attaching, ( with a Merge Block ), to my static grid it works again, for a short while and then fails to spin. I did also notice that wind turbine 1st spins at double speed, " about 800ish ", until I leave my base and return , then settles back to around ," 400ish ". I am Glad that the error is repeatable by Keen. So YAY waiting on the fix.
Update 1.205.026 is out and it works for me again
Update 1.205.026 is out and it works for me again
Hello, Engineer,
We are happy to inform you that this problem has been fixed in the Hotfix we released on Friday (1.205.026).
I will close this thread now.
If you are experiencing any other problems with the game, please let us know by opening a new thread on the forum.
Happy Engineering!
Kind Regards
Keen Software House: QA Department
Hello, Engineer,
We are happy to inform you that this problem has been fixed in the Hotfix we released on Friday (1.205.026).
I will close this thread now.
If you are experiencing any other problems with the game, please let us know by opening a new thread on the forum.
Happy Engineering!
Kind Regards
Keen Software House: QA Department
Replies have been locked on this page!