Engineer Slides Across Stationary Piston Floor
A floor on an extended piston causes the engineer or other free standing grids to slowly slide across it more often than not. Easily 75% of the time.
Engineer behaves exactly as expected of the piston is in its unexpended position, or while the elevator is moving. However, once in its extended position, regardless of the max height setting, the engineer or freestanding grids begin to slowly slide to the edge of the floor.
Part of the issue may be how tight the collision clearance is. Even though the floor and the hole are perfectly sized, the Impulse Axis settings need to be ramped to over 300Kn to make the elevator work. This happens repeatedly with different shapes and contraptions. The collision boxes need another look over.
Here are a few pictures and a quick blueprint to show it off.
I have the same bug 
Hello, SangurianSoul,
thank you for letting us know about this issue.
It has been successfully reproduced and put into our internal system.
Kind Regards
Keen Software House: QA Department
Hello, SangurianSoul,
thank you for letting us know about this issue.
It has been successfully reproduced and put into our internal system.
Kind Regards
Keen Software House: QA Department
Replies have been locked on this page!