grinder not targeting corner 2x1x1 tip when free on the ground
ENVIRONMENT: Windows 11, RTX 3070, i7 9700k, 16GB DDR4 RAM, 650W PSU.
Space engineers version: 1.201.013. Experimental mode not enabled.
HOW TO REPRODUCE: 1. Start on earth planet in the star system.
2. place 2x1x1 tip in the air so it falls to the ground.
4. Stand close to (without using the jetpack) the 2x1x1 tip with the grinder in hand pointing your cursor on the tip.
EXPECTED RESULT: An overlay with the name and information about the 2x1x1 tip appears on the right side of the screen. When a grinder is equipped, holding lmb will start to grind down the 2x1x1 tip.
ACTUAL RESULT: No overlay shows up. When holding lmb with a grinder, the grinder starts, but does not grind the 2x1x1 tip. You can even crouch and it still wont recognize the block. By changing the direction your looking at the tip, it is possible to sometimes trigger the overlay and be able to grind it down.
NOTES: Grass density settings was set to default values, and changed to 0, but seems to have no effect on the result.
I have the same bug 
Hello, Mr B,
thanks for letting us know.
Issue was successfully reproduced and put into our internal system.
Kind Regards
Keen Software House: QA Department
Hello, Mr B,
thanks for letting us know.
Issue was successfully reproduced and put into our internal system.
Kind Regards
Keen Software House: QA Department
Replies have been locked on this page!