Withdraw Components for Build Planner button ignores Conveyor Sorter direction
Step 1: Build an assembly with a container on the receiving end of a conveyor sorter and access on the outgoing end (connector or storage).
Step 2: Place some steel plates in the receiving cargo container.
Step 3: Create an build planner for something requiring steel plates.
Optional Step 4: From the access point, try to drag and drop the steel plates to your personal inventory. (This will fail due to the sorter).
Optional Step 5: Try to click the middle mouse button to withdraw the steel plates via the Build Planner (This too will fail).
Step 6: Open the inventory, select your personal inventory on the left and click the Withdraw components from Build Planner button in the center. This should fail as it does in step 4 and 5 but does not and pulls the steel plates.
I have the same bug
Hello, Guest,
thanks for letting us know!
With provided steps, issue was successfully reproduced and put into our internal system.
Kind Regards
Keen Software House: QA Department
Hello, Guest,
thanks for letting us know!
With provided steps, issue was successfully reproduced and put into our internal system.
Kind Regards
Keen Software House: QA Department
If this is still relevant, this also affects build planner deposition of materials where it can skip the component check.
Happens i.e. when building a basic refinery, adding a sorter towards the basic ref. that has whitelisted stone, then adding some other inventories on the other side. When depositing several ores in those other inventories, they can also end up in the basic refinery, despite not being able to get there, if deposited manually from the inventory access point.
If this is still relevant, this also affects build planner deposition of materials where it can skip the component check.
Happens i.e. when building a basic refinery, adding a sorter towards the basic ref. that has whitelisted stone, then adding some other inventories on the other side. When depositing several ores in those other inventories, they can also end up in the basic refinery, despite not being able to get there, if deposited manually from the inventory access point.
Replies have been locked on this page!