The projector stopped working correctly after the update
Good time of day. After the last two updates (after which one, I cannot say), welding of the projection of small ships with a stationary welding machine stopped. The projector is mounted on a rotor. The projection is touching the projector. I can do the welding by hand! As a stationary welder, it turns out to weld the blocks that I started to weld manually. But then the stationary welder continues to ignore the following projection blocks. I tried different projector positions and projections. Nothing helps (Once again, I would like to point out that the projection is being cooked manually, and the stationary welder finishes the blocks I started manually.
Доброго времени суток. После двух последних обновлений (после какого именно - не могу сказать) перестала производиться сварка проекции малых кораблей стационарной сварочной установкой. Проектор установлен на роторе. Проекция касается проектора. Я могу производить сварку вручную! Стационарным сварщиком получается сваривать блоки, которые я начал варить вручную. Но дальше стационарный сварщик продолжает не замечать следующие блоки проекции. Пробовал разные позиции проектора и проекции. Ничего не помогает ( Еще раз обращаю внимание, что вручную проекция варится, и начатые мною вручную блоки стационарный сварщик заканчивает.
I have the same bug
Hello!
Thank you for contacting us. Since this is a bug report, I'm moving your ticket to our support page, where our QA team will take care of you.
Kind Regards
Keen Software House
Hello!
Thank you for contacting us. Since this is a bug report, I'm moving your ticket to our support page, where our QA team will take care of you.
Kind Regards
Keen Software House
Hello! Please share the link to the new ticket placement.
Hello! Please share the link to the new ticket placement.
@yury : The title may be misplaced after moving, but it is
https://support.keenswh.com/spaceengineers/pc/topic/47970
@yury : The title may be misplaced after moving, but it is
https://support.keenswh.com/spaceengineers/pc/topic/47970
Hello Yury,
Thank you for reaching out to us on the forum, and please accept our sincere apologies for the delayed response to your thread.
Could you please confirm whether the issue occurs in a single-player world or on a Lobby/Multiplayer server? Additionally, was the world or server modded (has active MODs) when you encountered the issue?
If so, we recommend creating a blueprint of the affected grid (where the projector is not working as expected) and pasting it into a new, unmodded (vanilla) world or server. If the issue no longer occurs, it may be related to one or more of the active MODs.
However, if the issue still occurs in an unmodded world/server, please send us the blueprint of the grid along with a screen recording/video showing the issue. This will help us investigate and attempt to reproduce the issue on our side.
Kind regards,
Keen Software House: QA Department
Hello Yury,
Thank you for reaching out to us on the forum, and please accept our sincere apologies for the delayed response to your thread.
Could you please confirm whether the issue occurs in a single-player world or on a Lobby/Multiplayer server? Additionally, was the world or server modded (has active MODs) when you encountered the issue?
If so, we recommend creating a blueprint of the affected grid (where the projector is not working as expected) and pasting it into a new, unmodded (vanilla) world or server. If the issue no longer occurs, it may be related to one or more of the active MODs.
However, if the issue still occurs in an unmodded world/server, please send us the blueprint of the grid along with a screen recording/video showing the issue. This will help us investigate and attempt to reproduce the issue on our side.
Kind regards,
Keen Software House: QA Department
Добрый день! Файлы сброшу позже, пока нахожусь не дома. Отвечу на вопросы: проектор на малой сетке, стационарные сварочные аппараты не варят ни один чертеж, в том числе свежесозданные (однако продолжают варить элементы, не относящиеся к чертежу, а чертеж успешно варится ручным сварочным аппаратом). Играем на арендованном сервере, версию игры обновлял. Модификаций не установлено, так как только начали изучать эту игру.
Добрый день! Файлы сброшу позже, пока нахожусь не дома. Отвечу на вопросы: проектор на малой сетке, стационарные сварочные аппараты не варят ни один чертеж, в том числе свежесозданные (однако продолжают варить элементы, не относящиеся к чертежу, а чертеж успешно варится ручным сварочным аппаратом). Играем на арендованном сервере, версию игры обновлял. Модификаций не установлено, так как только начали изучать эту игру.
Hello Yuri,
Thank you for your response.
Please note that support tickets are processed in English. We kindly ask you to provide your response in English so we can assist you further.
Kind regards,
Keen Software House: QA Department
Hello Yuri,
Thank you for your response.
Please note that support tickets are processed in English. We kindly ask you to provide your response in English so we can assist you further.
Kind regards,
Keen Software House: QA Department
Replies have been locked on this page!