adjust the hinge axis
Not Enough Votes
if the hinge is rotated by -90, 0 or 90 degrees, then the blocks attached to the hinge practically coincide with the blocks of the grid on which the hinge stands.
BUT this prevents the merge block from sticking to the second merge block.
it is necessary to adjust the hinge block so that it is possible to connect the parts in 1 grid
Files:
Буфер обмена02....
I like this feedback 
You can't vote. Please authorize!
You can never merge like this. Hinge and hinge part will try to occupy the same block space on the same grid. You need the hinge part to remain on a subgrid when merging. In other words, you can't merge it back into the same grid, you will need at least one more additional hinge or any other mechanical block that creates a subgrid. For example: grid_A->hinge_base->hinge_part->grid_B->rotor_part->rotor_base->grid_A.
You can never merge like this. Hinge and hinge part will try to occupy the same block space on the same grid. You need the hinge part to remain on a subgrid when merging. In other words, you can't merge it back into the same grid, you will need at least one more additional hinge or any other mechanical block that creates a subgrid. For example: grid_A->hinge_base->hinge_part->grid_B->rotor_part->rotor_base->grid_A.
Replies have been locked on this page!