The conveyors seem to have a problem with the large cargo container.
I built one but couldn't get materials through it or 'see' other containers and connectors on the network.
After some testing, I found one of the side ports to not be working at all.. To test, build one and attach a conveyor with an access port on it (Like a 'T' piece).
I have the same bug 
I also am having this problem.
I also am having this problem.
Got the same problem, large cargo did not forward hydrogen.
Got the same problem, large cargo did not forward hydrogen.
Just posted about this... AFTER searching to see if anyone else had reported the same and didn't find anything!
Just posted about this... AFTER searching to see if anyone else had reported the same and didn't find anything!
Was going to report this. The "A2" side of the 7.5 cargo is broken., You can put something in it, and open that port and you can see the item. Place a block connecting to it, (like a conveyor) and you can no longer see into the block. It is just the side with the 'A2' icon not the 'b7' side.
Was going to report this. The "A2" side of the 7.5 cargo is broken., You can put something in it, and open that port and you can see the item. Place a block connecting to it, (like a conveyor) and you can no longer see into the block. It is just the side with the 'A2' icon not the 'b7' side.
Holy **** I thought I was losing my mind
Holy **** I thought I was losing my mind
Same issues here, all ports are accessible directly, but if you attach a connector or other conveyors to the port on the "A2" side you can't access the contents of the rest of the grid. All the other ports appear to work as expected.
Same issues here, all ports are accessible directly, but if you attach a connector or other conveyors to the port on the "A2" side you can't access the contents of the rest of the grid. All the other ports appear to work as expected.
Reported a couple of times... Most voted for post is HERE.. Surprisingly not picked up in the latest bugs marked 'Reported'
Reported a couple of times... Most voted for post is HERE.. Surprisingly not picked up in the latest bugs marked 'Reported'
Yep, the port that isn't working has markings "A2" and "REV 07-XW 7010" (check out the attachment).
You can still access it manually, but not through a conveyor line which caused quite a frustration to me when I noticed that one of my connectors isn't linked to the rest of cargo system.
Yep, the port that isn't working has markings "A2" and "REV 07-XW 7010" (check out the attachment).
You can still access it manually, but not through a conveyor line which caused quite a frustration to me when I noticed that one of my connectors isn't linked to the rest of cargo system.
The port also does not allow hydrogen to pass through
The port also does not allow hydrogen to pass through
Yeah.. Four or five reports of this now.
Yeah.. Four or five reports of this now.
The broken port is also mis aligned. Placing a conveyor on the port automatically off sets it and does not connect properly.
The Assembler has the same NO ACCESS issue on the bottom port.
The broken port is also mis aligned. Placing a conveyor on the port automatically off sets it and does not connect properly.
The Assembler has the same NO ACCESS issue on the bottom port.
Hello Engineers,
I have reported this issue and attached this thread to our internal ticket (SE2-29486).
Kind Regards,
Bartosz
Keen Software House
Hello Engineers,
I have reported this issue and attached this thread to our internal ticket (SE2-29486).
Kind Regards,
Bartosz
Keen Software House
This shows how the one port is offset by one detail cube, if that helps at all!
This shows how the one port is offset by one detail cube, if that helps at all!
Replies have been locked on this page!