Submit Feedback

Mirroring, Paint, and various other bugs I have discovered so far.

ThePhoenixKnight shared this bug ago

Won't Fix

Mirroring Troubles:

- Painting using middle click does not affect the other end of mirroring plane

- Unable to use mirroring plane with paint gun

- When using modular building with mirroring, the module is placed inverted on the other end of mirroring plane (Check images)

- Entering cockpit and other unknown causes disables mirroring

- Sometimes blocks will not mirror for unknown reasons (mostly seem to happen with 5m and 2.5x5m blocks)

Other bugs:

- Cannot use Undo paint

- Cannot paint "Interior Wall Pillar Flat 2.5m" using paint gun from a certain side

- By placing your character in the frame of a door then rolling into it, it creates phantom forces and causes the grid to clang.

Files:

I have the same bug

Replies (3)

Dark Wolf ●

Tagging on the paint thread, I noticed that the small cargo containers don't have many places where you can actually paint. For example, aiming at just about anything other than the edges/corners and you end up painting the blocks behind the cargo container. Haven't tried all variants.

Having the aim point for paint is nice but sometimes it wiggles through blocks due to bugs (like above) or sometimes just the fine-ness of the model having spaces - ex. the catwalk pieces with the mesh floor makes it easy to accidentally miss and paint the blocks behind. That one in particular is tricky because sometimes you NEED to reach behind, but sometimes you want to paint the catwalk itself...

Reply URL

Dakota Sylvan ●

YES! Please let us undo painting.

Reply URL

ThePhoenixKnight ●

I was realized shortly after making this post, and it probably should of been obvious.

All the bugs related to paint gun are already known by the launch of the game, and are just unfinished features.

URL

Keen Support ●

Hello ThePhoenixKnight,

First of all, please use one thread to describe one issue. Describing more than one issue in one thread makes it difficult to track properly, which may cause some of the issues described to be omitted / forgotten.

However, for the problems described in your post:

Painting using middle click does not affect... / Unable to use mirroring plane with paint gun / Entering cockpit and other unknown causes disables mirroring - This is known issue which is already reported in our internal database (SE2-21095).
As stated in aforementioned ticket, the Symmetry Mode will disable itself when:
- Using Tools - Debug Gun Tool and Paint Tool,
- Entering and Exiting Cockpit,
- Copy / Pasting of other grids.
This issue is described in this thread: Mirror function will turn itself off if you look away from the grid you are working on. | Space Engineers 2 Support
When using modular building with mirroring, the module is placed inverted on the other end of mirroring plane - This is known issue which is already reported in our internal database (SE2-21982).
This issue is described in this thread: Pasting on symmetry working not as expected | Space Engineers 2 Support
Sometimes blocks will not mirror for unknown reasons - This is known issue which is already reported (SE2-21094) and fixed on the latest Game version 1.5.0.3092.
You can find the thread describing this here: Bug with Symmetry Mode | Space Engineers 2 Support
Cannot use Undo Paint - This is already implemented as of Game version 1.5.0.3092
Cannot paint "Interior Wall Pillar Flat 2.5m" using paint gun from a certain side - I can paint the Interior Wall Pillar Flat 2.5m from any side on Game version 1.5.0.3092 - If you are still experiencing this issue, please create a new bug thread.
By placing your character in the frame of a door... - I could not reproduce this. As of Game version 1.5.0.3092 the character is getting pushed outside when rolling inside the door frame.

As all of these are either described in mentioned threads or fixed on current Game version, I am closing this thread.

Kind Regards,

Bartosz

Keen Software House

Hello ThePhoenixKnight,

However, for the problems described in your post:

Painting using middle click does not affect... / Unable to use mirroring plane with paint gun / Entering cockpit and other unknown causes disables mirroring - This is known issue which is already reported in our internal database (SE2-21095).
As stated in aforementioned ticket, the Symmetry Mode will disable itself when:
- Using Tools - Debug Gun Tool and Paint Tool,
- Entering and Exiting Cockpit,
- Copy / Pasting of other grids.
This issue is described in this thread: Mirror function will turn itself off if you look away from the grid you are working on. | Space Engineers 2 Support
When using modular building with mirroring, the module is placed inverted on the other end of mirroring plane - This is known issue which is already reported in our internal database (SE2-21982).
This issue is described in this thread: Pasting on symmetry working not as expected | Space Engineers 2 Support
Sometimes blocks will not mirror for unknown reasons - This is known issue which is already reported (SE2-21094) and fixed on the latest Game version 1.5.0.3092.
You can find the thread describing this here: Bug with Symmetry Mode | Space Engineers 2 Support
Cannot use Undo Paint - This is already implemented as of Game version 1.5.0.3092
Cannot paint "Interior Wall Pillar Flat 2.5m" using paint gun from a certain side - I can paint the Interior Wall Pillar Flat 2.5m from any side on Game version 1.5.0.3092 - If you are still experiencing this issue, please create a new bug thread.
By placing your character in the frame of a door... - I could not reproduce this. As of Game version 1.5.0.3092 the character is getting pushed outside when rolling inside the door frame.

As all of these are either described in mentioned threads or fixed on current Game version, I am closing this thread.

Kind Regards,

Bartosz

Keen Software House

Reply URL