When I used symmetry mode on a blueprint for a door withe detailing cubes and lights on mine side, it globally placed it right, but a problem arise in its orientation. While the one I was placing was oriented correctly, the symmetry placed door was rotated 180 degrees
Bug with Symmetry Mode
In Progress
Placing blocks in symmetry mode sometimes incorrectly places blocks - adding more/ less blocks on the opposite side. See picture attached:
Left side is the correct side, right side is incorrect... some blocks out of place.
Only seems to happen when placing multiple blocks at the same time. The game seems to over/ under compensate.
System info:
Processor12th Gen Intel(R) Core(TM) i5-12400F 2.50 GHz
Installed RAM16.0 GB (15.8 GB usable)
System type64-bit operating system, x64-based processor
NVIDA GTX 1650
Files:
image_2025-01-2...
I have the same bug 
It looks to me like a rounding error. Placing your cursor on the half of the end block
that's furthest from the end of the line you're trying to build will result in the mirrored version of the placed line being exactly one block shorter (see attachments).
The same applies for plane building mode.
I couldn't catch the game "overcompensating" though, but the possibility is there.
It looks to me like a rounding error. Placing your cursor on the half of the end block
that's furthest from the end of the line you're trying to build will result in the mirrored version of the placed line being exactly one block shorter (see attachments).
The same applies for plane building mode.
I couldn't catch the game "overcompensating" though, but the possibility is there.
Seems to happen with any module for copy and paste
Seems to happen with any module for copy and paste
I have this issue to. It doesn't mirror the grid. I can post a pic if you need.
happened to me when I was trying to paste a blueprint in symmetry mode. One side was right, and the other side was copied but the same direction.
I have this issue to. It doesn't mirror the grid. I can post a pic if you need.
happened to me when I was trying to paste a blueprint in symmetry mode. One side was right, and the other side was copied but the same direction.
Replies have been locked on this page!