Inertial dampeners stop working after using thrust override with ion thruster

BloodAngel099 shared this bug 3 months ago
Submitted

When I use thrust override on ion thrusters the inertial dampeners stop working for the opposing direction no matter much I toggle them on/off.


For example, when I set thrust override to anything above 0 to start moving the ship forward then cut it off the ship continues to drift forward. I can turn the ship and see that other thrusters begin to engage and reduce my speed, but it wont just "stop" me.


I was able to recreate problem in new creative game with provided little blue ion ship as well as my own built ship in survival game.

Replies (3)

photo
1

I encountered the same problem with hydrogen thrusters. I wanted to try an override mode for mining at constant speed. Now my ship do not damp anymore. I tried to destroy and rebuild the thrusters I override, but nothing. Z now only have effect on speed. If I am faster than 20m/s, it put me at that max speed, but does not stop the ship anymore.

photo
1

I also encountered the same problem. I covered the thrust of the thruster in the forward direction, and then the inertia suppressor effect in that direction disappeared. Even if I cleared the adjusted values, I couldn't make the inertia suppressor in that direction take effect again.

photo
1

For me too. Flying in Athmosphere of Verdure with athmospheric thruster and overwrited 4 small ones to hold the speed. After deactivating the 4 forward thrusters my ship kept speeding up backwards without a reasong. But it kept it hight, so the dampers worked at least kind of. It was like a "ghost overwrite force" because i checked twice that all thrusters were at 0 overwrite. Dampers worked fine. I had a hinge ramp at first. But during trouble shooting i removed it completly and nothing changed. No loose parts/blocks were inside the ship. Have still no clue.

Leave a Comment
 
Attach a file
You can't vote. Please authorize!