This object is in archive!
Small Grid Survival Kit Design
Submitted
Small grid survival kits should have both large and small ports on either side. This way wouldn't be limited on what direction the kit can be used in.
An example would be a small grid rover I made. The cockpit has an o2 gen on it, and a survival kit behind that. The rover looks great but with this design you cannot extract any of the larger components in either direction because the small ports between the o2 gen and the cockpit, and the small ports on the rear of the survival kit prevent it.
The assembler uses a dual purpose port, for use with conveyors or upgrade modules. So adding large ports on both sides of the kit with two small ports that line up with the current design could be very useful.
I like this feedback
This is the rover I spoke of https://steamcommunity.com/sharedfiles/filedetails/?id=2666740292
This is the rover I spoke of https://steamcommunity.com/sharedfiles/filedetails/?id=2666740292
either that, or properly mirrored versions of blocks that don't otherwise have a mirrored version, like medbay
either that, or properly mirrored versions of blocks that don't otherwise have a mirrored version, like medbay
Replies have been locked on this page!