Request: Small grid thin adapters A/B from More Conveyors mod

Vorg shared this feedback 5 years ago
Submitted

Somewhere on the main forums there is a thread about mods that should be stock. There are 2 small grid adapters in the mod pack More Conveyors should should be stock. They are very useful. They are 1x3 and both have 3 small ports on each of the 4 this sides. One had a large port one large side and 3 small along center line on the small side while the other has large ports on both sides like the stock but with the smalls around the edge,

Replies (1)

photo
1

Yes, an adapter for medium to small tubes would be fgret. Alternatively to making a brand new block, keen could simply add a few small ports to the conveyor frame.

photo
1

There is a stock 3x3x3 that sort of does that. But it is too big and overkill for some things. When building a small grid ship, you don't want to be tied to large grid blocks. The thin adapter is very useful. In the stock drop pod, I can use it to add a medium cargo and gas engine with cockpit and the Kit is tied to the cargo via the large port any conponent cn be moved between them or pulled out. It is only 2 small blocks longer then the stock spawn buggy and all system are tied together.

photo
Leave a Comment
 
Attach a file