This object is in archive!
SUGGESTION: settings for advanced rotors to stop in cockpit
Not Enough Votes
As you can see, on an advanced rotor, I can increase an decrease the limit where to stop, but I would like to configure a button for the advanced rotor in my cockpit to stop the rotor at 0 / 90 / 180 / 270 degrees or any other value I want to chose to configure. Is that possible?
Files:
advanced_rotor_...
I like this feedback 
This is the grid, where I want to move the rotor from 0 to 90 to 180 to 270 and back to 0 just by pressing a button in my cockpit.
This is the grid, where I want to move the rotor from 0 to 90 to 180 to 270 and back to 0 just by pressing a button in my cockpit.
Set the rottors breaking torque to maximum. That way if it's turned off it stopps. Add 4 event controllers. Set them to angle change mode. Set them each at different anlges and set the action to turn off the rottor.
Set the rottors breaking torque to maximum. That way if it's turned off it stopps. Add 4 event controllers. Set them to angle change mode. Set them each at different anlges and set the action to turn off the rottor.
Replies have been locked on this page!