SE2 [Suggestion] Use Basic Tools for merging/spliting grids/Aligned new grids

Jorgen shared this feedback 23 hours ago
Not Enough Votes

Welder/

Area Welder: Use <Right mouse button> to select a pair/pairs of objects from different grids but with common contact surfaces.

When selected weld until you get "grids merged" notification.

The objects should be able to be a bit out of alignment and will get

auto aligned when merged!

Grinder: Use <Right mouse button> to select pair/pairs of objects from same grid but

with common contact surfaces.

When selected grind until you get "grids split" notification.

Paint Tool: Use <Right mouse button> to select specific surfaces that make them

non stick (45° black/yellow stripes) marking it non stick.

the next block you place adjacent to that surface will be another grid.

This make it easier if you want to keep adjacent grids,

like elevator plattforms in its shaft!.

Of course make the Paint Tool buildable and not only creative.

Let it have all colors automatically but in the "Gearforge" you make it

possible to produce universal paint cartridge.

1 Si, 1 Ni = 10 Cartridges

1 Fe, 1 Cu, 1 Pb, 1 Mg = 20 Cartridges

1 Cr, 1 Ag, 1 Au, 1 Pl = 50 Cartridges

1 U, 1 Ice = 100 Cartridges

1 Cartridge = 1 RePainted Object/komponent


You can have the non stick color, and new grid color that vill be able to

stick a komponent to one grid but it will be a new grid. as a complement

of those new grid blocks that auto shots away until it hits something that

is not a grid.

That means if you want to place a block on your workshop floor you can paint the surface of the floor block with the new grid color.

Place a building block like the smal cubes as support block but it stick to the floor but is a separate grid when you have finished your build you

grinde the support block.


I belive that this way would be the most natural/intuitive way of merging/spliting grids.

I hope it is possible and that you consider these ides.


Jörgen Sahibzada

Engineer / Space Engineer Gamer

Leave a Comment
 
Attach a file