Setting the action of an event controller causes the first event controller to be selected
Submitted
When setting the action of an event controller and clicking "save", suddenly the first event controller in the control panel list is selected instead of the one you were editing. The action is saved to the correct event controller, but it's annoying having to select the correct one again.
I have the same bug
The view will reset to whichever block you have accessed the grid through. However, if you access the grid through a node conveyor (or something similar) and then browse to the control panel. It will not keep resetting your view.
The view will reset to whichever block you have accessed the grid through. However, if you access the grid through a node conveyor (or something similar) and then browse to the control panel. It will not keep resetting your view.
Along with what Sandcrawler posted, you can get around this issue by accessing the Event Controller directly from it's own control panel.
However, I think the issue is caused because after clicking "Save", the block list refreshes or re-sorts, thus forcing to return to the block you are currently accessing through. Accessing through node conveyors would probably work as well, since these don't have any settings that can be changed.
Along with what Sandcrawler posted, you can get around this issue by accessing the Event Controller directly from it's own control panel.
However, I think the issue is caused because after clicking "Save", the block list refreshes or re-sorts, thus forcing to return to the block you are currently accessing through. Accessing through node conveyors would probably work as well, since these don't have any settings that can be changed.
There are certainly issues with the UI jumping about all over the place. And accessing through the node conveyor is not perfect by any means.
For example; When going in through the node conveyor you can set true parameters on an event controller, change to false and the true parameters you just set appear as the false parameters. Need to click off the event controller and back onto it to refresh it and it appears fine. That refresh that is happening when going back to your original access block is probably solving some issues and hiding others, like this one.
There are certainly issues with the UI jumping about all over the place. And accessing through the node conveyor is not perfect by any means.
For example; When going in through the node conveyor you can set true parameters on an event controller, change to false and the true parameters you just set appear as the false parameters. Need to click off the event controller and back onto it to refresh it and it appears fine. That refresh that is happening when going back to your original access block is probably solving some issues and hiding others, like this one.
Replies have been locked on this page!