.2.39 Lockup and crash 4th contract mission SE2
Game was fine over the last weekend. Now it randomly locks up ever since mondays update. I was just walking around the base going to the landing pad. I had just updated my drivers for my RTX 3060 from Gigabyte. No change. Says I don't meet sys req on startup, but I believe I do.
World:
https://steamcommunity.com/sharedfiles/filedetails/?id=3621003428
System:
OS NameMicrosoft Windows 11 Home
Version10.0.26100 Build 26100
Other OS Description Not Available
OS ManufacturerMicrosoft Corporation
System NameDESKTOP-DB5I2I9
System ManufacturerGigabyte Technology Co., Ltd.
System ModelX470 AORUS GAMING 7 WIFI-50
System Typex64-based PC
System SKUDefault string
ProcessorAMD Ryzen 5 5500, 3600 Mhz, 6 Core(s), 12 Logical Processor(s)
BIOS Version/DateAmerican Megatrends International, LLC. F65d, 9/2/2024
SMBIOS Version3.3
Embedded Controller Version255.255
BIOS ModeUEFI
BaseBoard ManufacturerGigabyte Technology Co., Ltd.
BaseBoard ProductX470 AORUS GAMING 7 WIFI-50-CF
BaseBoard Versionx.x
Platform RoleDesktop
Secure Boot StateOff
PCR7 ConfigurationElevation Required to View
Windows DirectoryC:\WINDOWS
System DirectoryC:\WINDOWS\system32
Boot Device\Device\HarddiskVolume3
LocaleUnited States
Hardware Abstraction LayerVersion = "10.0.26100.1"
User NameDESKTOP-DB5I2I9\jonat
Time ZoneUS Mountain Standard Time
Installed Physical Memory (RAM)32.0 GB
Total Physical Memory31.9 GB
Available Physical Memory17.5 GB
Total Virtual Memory41.9 GB
Available Virtual Memory21.4 GB
Page File Space10.0 GB
Page FileC:\pagefile.sys
Kernel DMA ProtectionOff
Virtualization-based securityNot enabled
App Control for Business policyEnforced
App Control for Business user mode policyOff
Automatic Device Encryption SupportElevation Required to View
Hyper-V - VM Monitor Mode ExtensionsYes
Hyper-V - Second Level Address Translation ExtensionsYes
Hyper-V - Virtualization Enabled in FirmwareNo
Hyper-V - Data Execution ProtectionYes
I have the same bug
It seems like the video freeze up and crash is back at it. What is it that you reverted back to Keen? I had no recent problems until today. Its back to the same freeze up near the planet surface that was happening before.
It seems like the video freeze up and crash is back at it. What is it that you reverted back to Keen? I had no recent problems until today. Its back to the same freeze up near the planet surface that was happening before.
Heres some more
Heres some more
Hello Jonathon Brandemihl,
The warning about not meeting minimal requirements is appearing for you due to Windows being unable to find partitions on the drive on which the Game is installed.
As for the crash, from the logs I can see that the reason for it is your GPU freezing probably due to high VRAM usage. We are currently working on a solution for a memory leak here: It takes several seconds to open any menu everytime | Space Engineers 2 Support which I believe may be connected to your problem.
However, what we can try right now is:
1 - Lower your Graphical Settings - The logs say that you are running on High Preset with Ray Tracing on Medium. Please start with turning off the Ray Tracing and then switching to Medium Preset.
2 - Try disabling the GPU overclocking if your GPU is overclocked
3 - Check if your GPU does not reach high temperatures - (≤75–80°C)
Let me know if this helps.
Kind Regards,
Bartosz
Keen Software House
Hello Jonathon Brandemihl,
The warning about not meeting minimal requirements is appearing for you due to Windows being unable to find partitions on the drive on which the Game is installed.
As for the crash, from the logs I can see that the reason for it is your GPU freezing probably due to high VRAM usage. We are currently working on a solution for a memory leak here: It takes several seconds to open any menu everytime | Space Engineers 2 Support which I believe may be connected to your problem.
However, what we can try right now is:
1 - Lower your Graphical Settings - The logs say that you are running on High Preset with Ray Tracing on Medium. Please start with turning off the Ray Tracing and then switching to Medium Preset.
2 - Try disabling the GPU overclocking if your GPU is overclocked
3 - Check if your GPU does not reach high temperatures - (≤75–80°C)
Let me know if this helps.
Kind Regards,
Bartosz
Keen Software House
Replies have been locked on this page!