Ship/base speed/ distance protecton

I did not take a video of the issue so I am unable to provide one. If I had I would have sent it. Sorry.

When I was welding the ship I was using the starter hydro ship modified with 2 grinders and 1 welder on the front. I was using C to move the ship from front of the ship I was welding to the back of the ship. I was not moving fast at all. The ship was full of stuff needed to weld the new ship. The ending was that I got half way and something on the ship I was welding or the welder on the ship I was using blew up causing damage. Both grinders and the welder along with all the conveyors were gone. The ship I was welding was damaged and ended up moving causing the blueprint sections to say in place causing everything to misalign. The landing gear caught on the surface of the platform and auto-locked. I had it locked to a piston that was not extended so I am not sure if the welding caused vibrations or clang and caused the damage. This is the best I can do for a better explanation.

Hello Dustin Davis,

This may be caused by Piston however I was not able to reproduce this following your description. Have you experienced this issue again after the initial one?

Kind Regards,

Bartosz

Keen Software House

Due to the bug where we can't add anything to our existing blocks I have not attempted this again.

Hello Dustin Davis,

Does this issue still occurs for you on current Game version: 2.2.0.2116?

Kind Regards,

Bartosz

Keen Software House

I tried adding one but for some reason I couldn't. All I know is that when I use the piston as a standing point for a landing gear attached to a ship I am welding with another ship the landing gear and piston explode. Note that the landing gear is not attached to the small piston but is using the piston to hold the ship in place via the ship's landing gear. When I tried to add the video all I got was it was attempting to but never completed the attachment.

Hello Dustin Davis,

If you cannot add the video to the site here, please try one of these:

• Upload the video to your G-Drive and share the link here (Make sure that it is possible to access)
• Upload the video to YouTube as private and share the link here

Kind Regards,

Bartosz

Keen Software House

https://youtu.be/uSckKR7KpIE I still had issues attaching the file even after shortening the video. This link is from my channel.