Drill getting hit by an invisible obstacle
Need More Information
At some point, the game crashed, and I couldn't create a working drilling rig. I have two early models, and they still work fine. However, everything I create doesn't work. The problem is that the drills hit an invisible obstacle right at the start of drilling. Here are screenshots, as well as a non-working drilling rig posted on Steam.
Drilling Rig
https://steamcommunity.com/sharedfiles/filedetails/?id=3651294790
I have the same bug You can't vote. Please authorize!
Hello Ksaltek,
I have checked your Drilling Rig. What I can tell you is that the distance between the drills is too big and some voxels may not be getting mined. Please try to decrease the distance between the Drills to about 1 m - 0.5 m and let me know if this helps.
Kind Regards,
Bartosz
Keen Software House
Hello Ksaltek,
I have checked your Drilling Rig. What I can tell you is that the distance between the drills is too big and some voxels may not be getting mined. Please try to decrease the distance between the Drills to about 1 m - 0.5 m and let me know if this helps.
Kind Regards,
Bartosz
Keen Software House
I reduced the distance between the drills, and it works. However, I can't find the cause of the bug. I updated the blueprint I posted here earlier. Even if the distance between the drills is large, they should still dig. Check out the two new screenshots to see the problem. The drills dig to a depth of about 1 meter. Then they encounter an invisible obstacle.
https://images.steamusercontent.com/ugc/17933719564251595457/4A34860C27FD8209EC3D08A8C13EE0282AF15A3E/?imw=5000&imh=5000&ima=fit&impolicy=Letterbox&imcolor=%23000000&letterbox=false
https://images.steamusercontent.com/ugc/15467761228009514693/F02807188D323D988ED742E46890A8C163C72D86/?imw=5000&imh=5000&ima=fit&impolicy=Letterbox&imcolor=%23000000&letterbox=false
I reduced the distance between the drills, and it works. However, I can't find the cause of the bug. I updated the blueprint I posted here earlier. Even if the distance between the drills is large, they should still dig. Check out the two new screenshots to see the problem. The drills dig to a depth of about 1 meter. Then they encounter an invisible obstacle.
https://images.steamusercontent.com/ugc/17933719564251595457/4A34860C27FD8209EC3D08A8C13EE0282AF15A3E/?imw=5000&imh=5000&ima=fit&impolicy=Letterbox&imcolor=%23000000&letterbox=false
https://images.steamusercontent.com/ugc/15467761228009514693/F02807188D323D988ED742E46890A8C163C72D86/?imw=5000&imh=5000&ima=fit&impolicy=Letterbox&imcolor=%23000000&letterbox=false
Here are two more screenshots.
1 shows the distance to the surface where the drilling rig is blocked by an invisible obstacle.
https://images.steamusercontent.com/ugc/12076046855564565385/2D5FFF4FF291EEC326852E0F94A6735C1B619278/?imw=5000&imh=5000&ima=fit&impolicy=Letterbox&imcolor=%23000000&letterbox=false
2 shows lateral drilling possible.
https://images.steamusercontent.com/ugc/15784920352749286974/5C0DDF911DC1CA441913C260ACB509E8544698B8/?imw=5000&imh=5000&ima=fit&impolicy=Letterbox&imcolor=%23000000&letterbox=false
Here are two more screenshots.
1 shows the distance to the surface where the drilling rig is blocked by an invisible obstacle.
https://images.steamusercontent.com/ugc/12076046855564565385/2D5FFF4FF291EEC326852E0F94A6735C1B619278/?imw=5000&imh=5000&ima=fit&impolicy=Letterbox&imcolor=%23000000&letterbox=false
2 shows lateral drilling possible.
https://images.steamusercontent.com/ugc/15784920352749286974/5C0DDF911DC1CA441913C260ACB509E8544698B8/?imw=5000&imh=5000&ima=fit&impolicy=Letterbox&imcolor=%23000000&letterbox=false
Replies have been locked on this page!