Grid damage on asteroid while away
I started building a base on an asteroid using five vertical truss pillars going into the rock, connected by an armor half block bridge. I used copy-paste a bit while building the bridge, and everything looked completely fine afterward. I then started building a new ship to use for welding, constructing directly off the bridge so I could cut it loose once it was finished.
I ran out of cobalt when the ship was almost done (several thrusters were half-welded or still placed as projections), so I flew away to look for more. When I came back, the ship was completely wrecked, engulfed in fire and smoke, and floating free because the block connecting it to the bridge was gone. The ship itself had shifted out of place, while its unwelded thruster projections stayed in their original positions relative to the bridge. Two separate spots on the bridge (around 20 to 30 meters apart, above the truss pillars) were also heavily deformed and damaged with missing components.
I saw another report about grid-wide deformation when pasting (#48245), so I'm mentioning that I did use copy-paste earlier. However, in my case nothing happened when I pasted, the blocks actually took real damage instead of just warping, and it only happened in those two spots after I left and came back.
I attached some screenshots, only the first one is right after I arrived to the scene. Two are later when I noticed the damage to the bridge, but had already repaired the ship a bit with area welder.
I have the same bug
Replies have been locked on this page!