Grid weight attached via connector not calculated.
- I have seen this issue posted before but I was unable to find one posted since VS2.3 -
- I have seen a resolved post stating that weight has to be above 5% of primary grid weight to be accounted for and I can confirm that the subgrids mass is above 5% -
I am currently working with atmospheric thrusters on the starting planet with 1.00 Gravity. Attached is a photo of the ship I am using to try and move a cargo container . When the cargo container is attached to the ship via a connector (the method I want to use), the ship will fall to the ground at 6 m/s and flight stability is severely degraded.
I attached the same cargo container to the same ship via blocks on the same grid and then added 16.68 tons of weight to the container, and the ship is able to maneuver and hold a hover just fine.
MAIN ISSUE IN SUMMARY : Ship is extremely difficult to control and unable to maintain altitude with another grid added via connector.
Ship Mass 6,181 KG
Container Mass (Empty) 1,908 KG
I have the same bug 
Replies have been locked on this page!