Large Grid Rotor Displacements Cause Scrubbing With Small Grid Rotor Parts
Since the update that gave players the option to add Small and Medium Rotor Parts to Large Grid Rotor Bodies through the control panel menu, it appears that the collision model for the Large Bodies has changed.
This causes scrubbing between to the two parts when dropping the Rotor Displacement below 2cm on Large Advanced Rotors and -3cm for standard Large Rotors.
It also effects the 3x3 Advanced Rotor Part when the displacements drops below -2cm, but not nearly as badly as the 1x1 Small Rotor Parts.
This is has been causing quite a few issues among the mech building community as well as for anyone that uses this technique to mix grid sizes.
From what I can tell it appears that the collisions for the Large Rotors are now slightly taller than they was before the adjustements to the mechanical blocks were made.
This wasn't an issue before the change was made and players had to manually connect the to two grid sizes using the "Attach" function.
I have provided videos of the issue on both Rotor types.
Thank you.
I have the same bug
Replies have been locked on this page!